Nov . 09, 2026 01:28 Back To List

Container Lifting Jacks: How to Read Capacity, Fit and Control Specifications


Container lifting jacks should be assessed as a four-device system: each device carries 8 Tons and the set carries 32 Tons. This guide explains how corner-fitting clamping, adjustable card slots, electric hydraulic lifting, remote control, quick connection, and forklift relocation affect container handling and what to include in a quotation request.

Container Lifting Jacks: How to Read Capacity, Fit and Control Specifications
Illustration for reference; see the product page for actual photos and specifications.
01

Single unit capacity: 8 Tons (8T)

02

Total system capacity: 32 Tons (set of 4)

03

Lifting mechanism: Electric Hydraulic

04

Control system: Remote Control Operation

05

Clamping type: Corner Fitting Clamping

06

Compatibility: Standard International Containers

07

Adjustment: Height Adjustable Card Slots

08

Lifting mode: Synchronous or Individual

09

Installation: Plug and Play / Quick Connect

10

Auxiliary feature: Top Roller Slide Device

11

Space optimization: Quick-Fold Arm Rests

12

Relocation: Forklifts or other tools

Container lifting jacks suit factories, warehouses, and operations with low to medium container throughput. The purchasing decision depends on four practical checks: the load assigned to each lifting device, the way the equipment attaches to the container, the control method, and the space available for deployment and storage. Reading the specifications in that order helps you match the set to the containers and landing routine you use.

Capacity is a four-point question

Single unit capacity: 8 Tons

Each hydraulic lifting device has a lifting force of 8T. This is the figure to examine at one lifting point. The complete container load must be considered together with the four-device arrangement, so the single-unit value should remain part of the order review even when the total set capacity appears sufficient.

For a full-container landing operation, list the container and cargo details and ask us to review how the intended load is carried across the four devices. This gives the quotation a clearer operating basis than a total capacity figure alone.

Total system capacity: 32 Tons (set of 4)

The complete set consists of four hydraulic lifting devices with a total lifting force of 32T. This value describes the set, not one jack. It helps you assess the complete lifting arrangement, while 8T remains the relevant value for each individual device.

A warehouse receiving containers should compare both figures with its planned operation before selecting the equipment. Include the container model, cargo weight, and landing routine in your inquiry so we can review the intended four-point setup.

Connection and container fit

Clamping type: corner fitting clamping

The corner fitting clamping device links and locks with the corner fittings of conventional container models. This defines the physical connection between each lifting device and the container.

The specification matters when your site handles standard container configurations. Send the container models you use and the corner-fitting details with the order request. The quick-connect arrangement is useful only when the connection points match the containers being handled.

Compatibility: standard international containers

The equipment is compatible with standard international containers. This identifies the container family for which the clamping arrangement is intended.

If several container sizes are handled at one location, list them together rather than relying on one representative model. We can then review the fit of the clamping and upper card-slot arrangement for the planned range.

Adjustment: height-adjustable card slots

The upper card slot adjusts up and down to suit different container sizes. Its redesigned form is easier to operate, with tighter seams and improved stability.

This specification is useful when one lifting set serves containers with different dimensions. Tell us which container sizes you expect to handle and identify the slot positions needed for the connection. The operator should set the four card slots for the container before the lifting routine starts.

Auxiliary feature: top roller slide device

A top roller slide device assists movement up and down around the upper part of the lifting arrangement. It is relevant to positioning and adjustment, especially when the set is moved between landing locations.

Review the available room around the container and the route from storage to the landing area. A site layout or photograph can help us assess how the roller device will fit into the planned setup.

Lifting mechanism and control

Lifting mechanism: electric hydraulic

The lifting device uses an electric hydraulic mechanism. This describes the power and movement arrangement that must be accommodated at the operating location.

Plan the lifting mechanism together with the control method and the four-device configuration. When requesting a quotation, describe the landing locations and how the equipment will be deployed so the operating arrangement can be reviewed as a whole.

Lifting mode: synchronous or individual

The four lifting devices can operate synchronously or individually. Synchronous lifting coordinates movement across the set. Individual lifting allows a separate lifting platform to be adjusted when the container needs position correction during landing or alignment.

Choose the mode according to the work sequence. A routine that raises or lowers all four corners together needs synchronized operation. A routine that includes separate correction at one platform needs the individual function as well. Include that sequence in your inquiry.

Control system: remote control operation

The control system uses remote control operation. The operator can observe the lifting status and adjust individual lifting platforms separately.

This arrangement is relevant when the operator needs a clear view of the container and its lifting points. Identify the intended operator position and whether the work requires synchronized control, individual adjustment, or both.

Deployment, movement, and storage

Installation: plug and play / quick connect

The quick-connect group is arranged for plug and play deployment, which reduces assembly work when the set is put into service. This matters when one set is used at more than one landing location.

Confirm the connection sequence, the number of devices in the set, and the setup space when ordering. Send the operating locations and the planned deployment path so we can review the arrangement before supply.

Space optimization: quick-fold arm rests

The arm rests fold quickly to save space and reduce collisions. This specification affects storage and movement through a warehouse.

Measure the intended storage position and the route to the landing area. Include those site dimensions in your inquiry so the folded equipment and its movement can be considered together.

Relocation: forklifts or other tools

The equipment must be moved to a suitable operating location with forklifts or other tools. This is a deployment requirement for sites where the set serves multiple landing areas.

Separate the lifting plan from the relocation plan. Identify the available handling tool, storage point, travel route, and landing locations before placing the order.

Specific questions that affect the order

Does the adjustable card slot select a different lifting capacity?

No. The slot adjustment concerns container fit, while capacity remains 8T for each device and 32T for the set of four. Use the slot position to match the container connection, then assess the intended operation with both capacity figures. Send the container sizes and cargo weight together so fit and lifting requirements are reviewed as separate parts of the order.

Is the top roller device part of the lifting mechanism?

The top roller slide device is an auxiliary sliding aid, while the lifting mechanism is electric hydraulic. This distinction helps you plan the equipment around the landing area: the hydraulic device provides the lifting arrangement, and the roller device assists movement up and down near the upper connection. Include a site layout when access around the container is limited.

Which feature matters when one set serves several landing locations?

Quick connection and forklift or other tool relocation address different stages of that workflow. Plug and play / quick connect concerns deployment after the equipment reaches the location. Forklifts or other tools move the equipment there. Send the storage point, travel route, and landing locations so we can review both stages rather than only the lifting point.

Prepare the quotation details

Our container lifting jack system fits four-point container lifting where 8T per device, 32T for the set, corner-fitting clamping, adjustable card slots, and remote control are required. Send the container models, cargo weight, corner-fitting details, lifting sequence, landing-area layout, storage position, available handling tools, and number of landing locations for a quotation.

The company

Yeed Tech Co.,Ltd.

Yeed Tech Co., Ltd. is an emerging technology enterprise dedicated to intelligent solutions for steel structure production processes. The company has developed a series of new processing equipment that integrates automation, intelligence, integration, safety, and automation to replace traditional manual labor in the production process of steel structures, including cutting, forming, welding, and painting.The main product lines currently on the market include: intelligent spraying lines for steel components,…

About Us ↗Visit company website ↗
Share
up2
wx
wx
Whatsapp
email
tel3
up

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.