How are Oil Seals made?

There is a British Standard laid down for the control of synthetic rubbers. BS 3574 (1989) helps to determine shelf life – for instance, Nitrile (NBR) and Polyacrylic (ACM) are Group ‘B’ rubbers and have a 7-year life, whilst Silicone (VMQ) and Fluoroelastomers (Viton®) are Group ‘C’ rubbers and have a 10-year shelf life. PTFE and Leather do not come into this category but like the others should be kept in the original packing for as long as possible away from direct light, dust, and humidity. Ozone, which can also be produced by battery-driven forklift trucks has a very bad effect on synthetic rubbers. Finally, protect the sealing lip – DO NOT hang the seals on nails, wire etc.

Table 2 b): Common types of oil seals (without spring)

Before installing the oil seal, it is important to lubricate it to reduce friction and prevent damage during installation. A silicone-based lubricant is recommended for most applications. If the oil seal is to be installed in a high-temperature or high-pressure environment, a more specialized lubricant may be required.

Finding the right rubber oil seal for your application

Viton (FKM/FPM) Oil Seals

When repairing, remove the old oil seal

Material Code ISO 1629

Fit the gasket to the cover, making sure any screw holes line up. If the gasket has tongues, fit them into their cutouts.

VMQ (silicone)

Of course, all rubber materials and seals will provide a range of benefits; however, you will need to consider chemical compatibility, sufficient temperature ranges, pressure ranges, and more. 

New Spark Plugs: Importance and Impact

When it involves a repair, you must first remove the old oil seal. To remove an oil seal, it is important to use the right tools to avoid damaging the shaft and bore. The best solution is therefore to pull out the oil seal without having to completely dismantle the shaft. This can be done by making a few holes in the oil seal with an awl and a hammer. You can then use a hook to pull the oil seal out of its seat. You could also screw some screws into the holes and then slowly pull out the screws to extract the oil seal from its housing. Be careful not to damage the shaft or housing in the process.

The group of oil seals used in dynamic applications include radial shaft seals that seal a rotating shaft around its circumference. They are also known as lip seals, but in this blog we will use the term oil seals.

Choosing the right oil seal