LITHOPONE

Macromolecular oxidation was detected in proteins by the colorimetric measurement of Advanced Oxidation Protein Products (AOPP) and in lipids by the colorimetric quantification of malondialdehyde (MDA). Standard curves were run with chloramine-T and 1,1,3,3 tetraethoxypropane (TEP) for AOPP and MDA methods, respectively [29], [30], [31]. Values were normalized to initial protein content in samples, measured with Bradford reagent [32]. The standard deviation of at least six measures was calculated and p-value < 0.05 were considered significant.

At the present JECFA meeting, the committee considered additional toxicological studies relevant to the safety assessment of the chemical that investigated its toxicokinetics, acute toxicity, short-term toxicity, long-term toxicity and carcinogenicity, genotoxicity, and reproductive and developmental toxicity, as well as special studies addressing its short-term initiation/promotion potential for colon cancer. The experts acknowledged that a large number of toxicological studies have been conducted using test materials, including nanoparticles, having size distributions and physico-chemical properties not comparable to real-world uses of titanium dioxide as a food additive. The studies on non-representative materials were evaluated by JECFA, but the committee concluded that such studies are not relevant to the safety assessment of the additive.

Edelweiss, 14.5 per cent zinc sulphide, 84 per cent barium sulphate, 1.5 per cent carbonate of lime.

There are many titanium dioxide manufacturer in market. Rutile Titanium dioxide in the form of a white pigment is widely used in the industry:
1. In the production of inks and printing inks - as a pigment with excellent whiteness and very good properties.
2. Plastic materials, such as: wall claddings, floor coverings (linoleum, rubber, PVC), roofing, wires, cables - titanium white is included in the protective layer against degradation of atmospheric conditions (especially UV radiation), and has concealing properties.
3. Cosmetics: gels, eye shadows, foundation, lipstick, pastes (including teeth) - as a component of pigments.
4. Tanning preparations - surface-modified with a hydrophobic coating - acts as a UV filter.
5. Paper pulp - anatine is used as a filler and reinforcement.
6, Packaging film, adhesive mortars, plasters, cement, caulking agents, ceramic tiles - is an additive that improves resistance to colour change.
7. PCigar production - titanium white gives the ash a white color.

Analyst Insight