Polyvinyl butyral (PVB) is dissolved into 12 ~ 14% solution with ethanol and made into film. It is used for printing paper film of ceramic (or enamel) products. The fired ceramic (or enamel) patterns have bright color and smooth texture. The flower paper is characterized by convenient use, low cost, smaller than the original glue, greatly reducing the decal process and high color burning rate. At present, most porcelain factories in China have formed relatively formal production lines for standardized production. Therefore, the demand for PVB in the ceramic (or enamel) flower paper industry is increasing.

Application field of polyvinyl butyral -- electronic adhesive

Polyvinyl butyral contains hydroxyl, vinyl acetate and butyraldehyde, which has high bonding properties. Phenolic Resin was added into PVB ethanol solution to make adhesive, which can be used for a long time at 120 ℃. The product has strong adhesion to metal, wood, leather, glass, fiber and ceramics; FRP can be manufactured to replace non-ferrous metals such as steel, aluminum and copper; The adhesive made by adding this product and curing agent into epoxy resin is often used for bonding and assembly of electronic instrument components, bonding between metal and porous materials, emergency repair, etc. it can also be used in the field of electronic ceramics. In the development of ceramic integrated electronic circuits, this product with medium viscosity and low hydroxyl is used as ceramic powder adhesive to increase the primary strength of ceramics.

Application field of polyvinyl butyral -- copper foil adhesive

Polyvinyl butyral (PVB) and phenolic resin cooperate to produce copper foil adhesive, which is used in the production of copper clad laminate. It has good peel strength and tin welding temperature resistance, and is widely used in various fields.

Application field of polyvinyl butyral - self adhesive enamelled wire paint

Polyvinyl butyral is the main raw material of self-adhesive enamelled wire paint. After the enameled wire is wound and formed in the electrodes of motors, electrical appliances and instruments, as long as it is heated for several minutes at a certain temperature or treated with appropriate solvent, the coils can be bonded together by themselves without impregnation and drying.

The first study addressing the experimental convergence between in vitro spiking neurons and spiking memristors was attempted in 2013 (Gater et al., 2013). A few years later, Gupta et al. (2016) used TiO₂ memristors to compress information on biological neural spikes recorded in real time. In these in vitro studies electrical communication with biological cells, as well as their incubation, was investigated using multielectrode arrays (MEAs). Alternatively, TiO₂ thin films may serve as an interface material in various biohybrid devices. The bio- and neurocompatibility of a TiO₂ film has been demonstrated in terms of its excellent adsorption of polylysine and primary neuronal cultures, high vitality, and electrophysiological activity (Roncador et al., 2017). Thus, TiO₂ can be implemented as a nanobiointerface coating and integrated with memristive electronics either as a planar configuration of memristors and electrodes (Illarionov et al., 2019) or as a functionalization of MEAs to provide good cell adhesion and signal transmission. The known examples are electrolyte/TiO₂/Si(p-type) capacitors (Schoen and Fromherz, 2008) or capacitive TiO₂/Al electrodes (Serb et al., 2020). As a demonstration of the state of the art, an attempt at memristive interlinking between the brain and brain-inspired devices has been recently reported (Serb et al., 2020). The long-term potentiation and depression of TiO₂-based memristive synapses have been demonstrated in relation to the neuronal firing rates of biologically active cells. Further advancement in this area is expected to result in scalable on-node processors for brain–chip interfaces (Gupta et al., 2016). As of 2017, the state of the art of, and perspectives on, coupling between the resistive switching devices and biological neurons have been reviewed (Chiolerio et al., 2017).

Pure titanium dioxide is a fine, white powder that provides a bright, white pigment. Titanium dioxide has been used for a century in a range of industrial and consumer products, including paints, coatings, adhesives, paper, plastics and rubber, printing inks, coated fabrics and textiles, as well as ceramics, floor coverings, roofing materials, cosmetics, toothpaste, soap, water treatment agents, pharmaceuticals, food colorants, automotive products, sunscreen and catalysts.

• FAQ – EFSA 2021 safety assessment of titanium dioxide (E171)