Requirements of the shaft
Even more important than a correct interference fit of the Oil Seal is a perfectly smooth shaft in the region of the seal, particularly if shaft surface speed is high and the medium to be sealed is under a certain amount of excess pressure. The surface roughness of the shaft depends on the average profile depth Ra of the tool marks caused by the machining process. Oil Seals made of PTFE require, independent of the surface speed, a surface roughness of between 0,1 to 0,2 mm, because PTFE has less wear resistance than rubber seals. For normal circumstances, the shaft in the region of the seal must have a surface roughness of approximately: To summarize, the surface of the shaft in the region of the seal should not have noticeable machining marks. For pivoting shafts and other difficult or critical sealing applications, it is recommended that Oil Seals with a helical groove hydrodynamic pattern, which has a pumping effect, be used. When grinding and polishing, an axial movement of the grindstone along the shaft must be avoided in order to prevent machine lay.
When selecting valve cover gaskets, head gaskets, and spark plugs, it is essential to prioritize quality, compatibility, and performance. High-quality gaskets and spark plugs are designed to withstand the demanding conditions of automotive operation, providing reliable sealing solutions and efficient ignition capabilities. Choosing reputable suppliers and manufacturers known for producing high-quality components is crucial to ensure the reliability and longevity of these critical engine components.
Comment area