99% Min

The calcined product obtained by the ordinary zinc-barium white preparation method is beaten into a slurry, which is then surface-treated with sodium silicate, aluminum sulfate or sodium aluminate and surfactant, and then filtered, washed, dried and pulverized. Can.

According to a 2011 study published in Radiology and Oncology, titanium dioxide may lead to some adverse effects in the body, including oxidative stress, inflammation, and changes in cell signaling pathways. Additionally, pure titanium dioxide can be notably harmful when inhaled.

In addition to its strength and UV resistance, nano titanium dioxide also has excellent optical properties. This makes it an ideal material for use in pigments and coatings, as it can help create vibrant colors and enhance the appearance of a wide range of products. Our nano titanium dioxide products are carefully formulated to ensure that they provide the best possible optical properties, so customers can achieve the look they desire.

From a stability standpoint, lithopone, a fusion of zinc sulfide and artificially precipitated barite, is non-toxic and exhibits resilience to mild lyes and acids. However, it is incompatible with colors containing copper. Despite its strong covering power in oil, lithopone’s drying capabilities are notably limited, posing potential issues for artists. Notably, early experimentation with lithopone-based grounds instead of zinc white resulted in undesirable darkening, although this blackness receded upon drying. This unpredictable behavior has sparked debate among scientific communities, emphasizing the need for further exploration and understanding of this pigment.

Titanium dioxide has many purposes in both food and product development.

Then, there’s ultrafine-grade, also known as nanoscale titanium dioxide. This is used for its ability to scatter lightly as an ultra-fine powder. This gives it the ability to lightly absorb into the skin while providing a bit of transparency. Below, we’ll go more into the cosmetic uses of these two forms of titanium dioxide.

Volatile elements 105℃

To ensure the optimal precipitation percentage, it is important to carefully control these factors during the precipitation process. For example, a higher concentration of titanium sulfate will typically result in a higher precipitation percentage, but may also lead to the formation of impurities. On the other hand, a lower pH of the reaction mixture can promote the precipitation of titanium hydroxide, but may also result in a lower precipitation percentage.

The skin of an adult person is, in most places, covered with a relatively thick (∼10 μm) barrier of keratinised dead cells. One of the main questions is still whether TiO₂ NPs are able to penetrate into the deeper layers of the skin. The majority of studies suggest that TiO₂ NPs, neither uncoated nor coated (SiO₂, Al₂O₃ and SiO₂/Al₂O₃) of different crystalline structures, penetrate normal animal or human skin. However, in most of these studies the exposures were short term (up to 48 h); only few long-term or repeated exposure studies have been published. Wu et al.83 have shown that dermal application of nano-TiO₂ of different crystal structures and sizes (4–90 nm) to pig ears for 30 days did not result in penetration of NPs beyond deep epidermis. On the other hand, in the same study the authors reported dermal penetration of TiO₂ NPs with subsequent appearance of lesions in multiple organs in hairless mice, that were dermal exposed to nano-TiO₂ for 60 days. However, the relevance of this study for human exposure is not conclusive because hairless mice skin has abnormal hair follicles, and mice stratum corneum has higher lipid content than human stratum corneum, which may contribute to different penetration. Recently Sadrieh et al. performed a 4 week dermal exposure to three different TiO₂ particles (uncoated submicron-sized, uncoated nano-sized and coated nano-sized) in 5 % sunscreen formulation with minipigs. They found elevated titanium levels in epidermis, dermis and in inguinal lymph nodes, but not in precapsular and submandibular lymph nodes and in liver. With the energy dispersive X-ray spectrometry and transmission electron microscopy (TEM) analysis the authors confirmed presence of few TiO₂ particles in dermis and calculated that uncoated nano-sized TiO₂ particles observed in dermis represented only 0.00008 % of the total applied amount of TiO₂ particles. Based on the same assumptions used by the authors in their calculations it can be calculated that the total number of particles applied was 1.8 × 10¹³ /cm² and of these 1.4 x10⁷/cm² penetrated. The surface area of skin in humans is around 1.8 m²  and for sun protection the cream is applied over whole body, which would mean that 4 week usage of such cream with 5 % TiO₂ would result in penetration of totally 2.6 × 10¹⁰ particles. Although Sadrieh et al.concluded that there was no significant penetration of TiO₂ NPs through intact normal epidermis, the results are not completely confirmative.

Overall, CAS 13463-67-7 stands out as a reliable and trustworthy titanium dioxide factory that is committed to delivering top-quality products and services. With its focus on quality, sustainability, and innovation, the factory has established itself as a leader in the industry and a preferred partner for companies looking to source titanium dioxide for their dyes and pigments.